Reza Mahmudi

USERN Advisory Board

Education

B.Sc , 1976, ,
M.Sc , 1979, ,
Ph.D , 1987, ,

Papers in International Journals

Reza Mahmuodi. "Yiels loci of amisotrapic aluminum sheeto." INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 37, no. 9 (1732): 995-1010 .
Reza Mahmuodi. "Forming limits in biaxial stretching of aluminium sheets and foils." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 37, no. 1,4 (1993): 203-216.
Reza Mahmuodi. "High - temperatuetersile defermation of fine grained aluminum sheeto." ALUMINUM -, no. 70 (1993): -.
Reza Mahmuodi. "Yield point phenomenon in ultrafine - grained aluminium sheets." MATERIALS LETTERS 19, no. 5,6 (1994): 243-246.
Reza Mahmuodi. "strain rate seneigvity of a wuaught Af - 102 / Fe allay." Suipta Mateialia -, no. 32 (1995): -.
Reza Mahmuodi. "Grain beundauy strengthening in a fine grained aluminum alloy." Scripta Metallurgica et Materialia 32, no. 5 (1995): 781-786.
Reza Mahmuodi. "Plastic instability in equi-biaxial deformation of aluminium alloy sheet." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 57, no. 3 (1996): 266-271.
Reza Mahmuodi. "Post - Uniform deformation in uniaxial and equi - biaxial stretching of aluminium alloy sheets." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 70, no. 1 - 3 (1997): 93 - 98.
Reza Mahmuodi. "Stress - state dependence of work - hardening behavior in aluminium alloy sheet." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 72, no. 2 (1997): 302-307.
Reza Mahmuodi. "Forming behavior of roll-cast AA8079 Aluminium alloy sheet." Aluminium -, no. 74(10) (1997): 0.
Reza Mahmuodi. "Sunface roughening duins uneayial and egui biaxial stretehing of 10 - 30 brass sheeto." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY -, no. 80 (1997): -.
Reza Mahmuodi, and M Aghaie Khafri . "Flow localization and Iasti c instability during the tenslie deformatin of A1 alloy sheet." JOM -, no. 25-50 (1998): 50-52.
Reza Mahmuodi. "Anovel technique for plane - shain tension teshing of sheet metalo." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 86, no. 1 (1999): 237-244.
Reza Mahmuodi. "Epfects of cryogeruc treato on the mechanical properhies and weas behavior of gigh- speed sted Mz." Heat Treatmant of Metals -, no. 27 (2000): -.
R Roumina , B Raeisinia , and Reza Mahmuodi. "Room temperature indentation creep of cast Pb - Sb alloys." SCRIPTA MATERIALIA 51, no. 6 (2004): 497-502.
M Aghaie Khafri , and Reza Mahmuodi. "Predicting of plastic instability and forming limit diagrams." INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 46, no. 9 (2004): 1289-1306.
B Tekyeh Marouf , R Bagheri , and Reza Mahmuodi. "Effects of number of layers and adhesive ductility on impact behavior of laminates." MATERIALS LETTERS 58, no. 22-23 (2004): 2721-2724.
B Raeisinia , R Roumina , and Reza Mahmuodi. "Investigation of stress exponent in the power law creep of Pb - Sb alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 382, no. 2 (2004): 15-22.
Reza Mahmuodi, Reza Mohammadi , and P Sepehrband . "Determination of tearing energy from uniaxial tension tests of aluminum alloy sheet." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 147, no. 2 (2004): 185-190.
Abdol Reza Geranmayeh , and Reza Mahmuodi. "Room temperature indentation creep of lead - free Sn - 5%Sb solder alloys." JOURNAL OF ELECTRONIC MATERIALS 34, no. 7 (2005): 1002-1009.
Abdolreza Geranmaye , and Reza Mahmuodi. "Power law indentation creep of Sn - 5%Sb solder alloys." JOURNAL OF MATERIALS SCIENCE -, no. 40 (2005): 3361-3366.
P Sepehrband , Reza Mahmuodi, and F Khomamizadehb . "Effect of Zr addition on the aging behavior of A319 aluminum cast alloy." SCRIPTA MATERIALIA 52, no. 4 (2005): 253-257.
M Ehrdad Aghaie-khafri , and Reza Mahmuodi. "Optimizing homogenization parameters for better stretch formability in an Al–Mn–Mg alloy sheet." Materials Science and Engineering: R: Reports 399, no. --- (2005): 173-180.
Ahmad Chamanfar , and Reza Mahmuodi. "Compensation of elastic strains in the determination of plastic strain ratio ( R ) in sheet metals." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 397, no. 1,2 (2005): 153-156 .
A Rezaee Bazzaz , and Reza Mahmuodi. "Superplastic indentation creep of Sn - Pb - Sb peritectic." MATERIALS LETTERS , no. 59 (2005): 1705 - 1708.
Abolfazl Rezaee Bazzaz , and Reza Mahmuodi. "Impression creep of Sn–40Pb–2.5Sb peritectic solder alloy." MATERIALS SCIENCE AND TECHNOLOGY -, no. --- (2005): -.
Mehrdad Aghaie Khafri , and Reza Mahmuodi. "The effect of preheating on the formability of an Al-Fe-Si alloy sheet." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY -, no. 169 (2005): 38-43.
Reza Mahmuodi, and M M Alaiha . "Control of Earing in Deep Drawing of Roll-Cast AA3003 Aluminium Sheets." Materials Science Forum -, no. 519-521 (2006): 1545-1550.
S Hossein Nedjad , Mahmood Nili Ahmadabadi , Reza Mahmuodi, T Furuhara , and T Maki . "Analytical transmission electron microscopy study of grain boundary precipitates in an Fe - Ni - Mn maraging alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 438-440, no. --- (2006): 288-291.
Ahmad Chamanfar , and Reza Mahmuodi. "Effect of specimen geometry, gage length, and width measurement locations on plastic strain ratio ( R - value ) in sheet metals." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 37, no. 12 (2006): 3487-3477.
Reza Mahmuodi, Abdolreza Geranmayeh , Seyyed Reza Mahmoodi , and Ali Khalatbari . "Effect of cooling rate on the room - temperature indentation creep of cast lead - free Sn - Bi solder alloys." Physica Status Solidi (A) Applications and Materials 204, no. 7 (2007): 2302-2308.
Reza Mahmuodi, Abdol Reza Geranmayeh , and Abolfazl Rezaee Bazzaz . "Impression creep behavior of lead - free Sn–5Sb solder alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 448, no. --- (2007): 287-293.
Hadi Noori , and Reza Mahmuodi. "Prediction of forming limit diagrams in sheet metals using different yield criteria." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 38, no. --- (2007): 2040-2052.
Reza Mahmuodi, Abolfazl Rezaee Bazzaz , and Hamid Reza Banaie Fard . "Investigation of stress component in the room temperature creep of Sn - 40Pb - 2.5Sb solder alloy." JOURNAL OF ALLOYS AND COMPOUNDS 429, no. --- (2007): 192-197.
Behzad Dehghan Manshadia , Hamed Mahmudib , Ali Abediana , and Reza Mahmuodi. "A novel method for materials selection in mechanical design: Combination of non - linear normalization and a modified digital logic method." MATERIALS & DESIGN 28, no. 1 (2007): 8-15.
Reza Mahmuodi, Abdol Reza Geranmayeh , and A Rezaee Bazzaz . "Impression creep behavior of cast Pb - Sb alloys." JOURNAL OF ALLOYS AND COMPOUNDS 427, no. 1-2 (2007): 129-124.
Melika Allami , Mahsa Bakherad , Abdolreza Geranmayeh , and Reza Mahmuodi. "Indentation creep study of lead - free Sn - 5%Sb solder alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 457, no. 1,2 (2007): 173-179.
Reza Mahmuodi, and A Rezaee Bazzaz . "Superplastic power - law creep of Sn - 40Pb - 2.5Sb peritectic alloy." JOURNAL OF MATERIALS SCIENCE 42, no. 11 (2007): 4051-4059.
Reza Mahmuodi, Abdolreza Geranmayeh , Seyed Reza Mahmoodi , and Ali Khalatbari . "Room - temperature indentation creep of lead - free Sn - Bi solder alloys." JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS 18, no. 10 (2007): 1071-1078.
Mahsa Bakherad , Melika Gholami , Abdoreza Geranmaye , and Reza Mahmuodi. "Effect of Homogenization on the Indentation Creep of Cast Lead-Free Sn-5%Sb Solder Alloy." JOURNAL OF ELECTRONIC MATERIALS 36, no. 12 (2007): 1703-1710.
S.a. Torbati-sarraf, and Reza Mahmuodi. "ULTRA FINE-GRAINED AZ31 MAGNESIUM ALLOY OBTAINED BY A COMBINATION OF GRAIN REFINEMENT AND EQUAL CHANNEL ANGULAR PRESSING." INTERNATIONAL JOURNAL OF MODERN PHYSICS C 5, no. - (2012): 307-315.
A.r. Geranmayeh, Reza Mahmuodi, A. Movahedi-rad, and M.h. Malekoshoaraei. "High-temperature mechanical properties of AZ61 and AZ61-0.7Si magnesium alloys." KOVOVE MATERIALY-METALLIC MATERIALS 50, no. - (2012): 393-397.
Ahmad Zafari, Hamid Reza Ghasemi Monfaredrad, and Reza Mahmuodi. "Effect of rare earth elements addition on the tribological behavior of AZ91D magnesium alloy at elevated temperature." WEAR 303, no. 1-2 (2013): 98-108.
M. Karami, and Reza Mahmuodi. "Shear punch superplasticity in equal-channel angularly pressed Mg–12Li–1Zn alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 576, no. 576 (2013): 156-159.
M. Karami, and Reza Mahmuodi. "The Microstructural, Textural, and Mechanical Properties of Extruded and Equal Channel Angularly Pressed Mg-Li-Zn Alloys." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 44, no. 8 (2013): 3934-3946.
M. Karami, and Reza Mahmuodi. "Hot shear deformation constitutive analysis and processing map of extruded Mg–12Li–1Zn bcc alloy." MATERIALS & DESIGN 53, no. 53 (2014): 534-539.
, Reza Mahmuodi, Fatemeh Khalatbari, Nasrin Kashi, and Ghazal Nayyeri. "Indentation Creep of Lead-Free Sn-5Sb Solder Alloy with 1.5 wt% Ag and Bi Additions." JOURNAL OF ELECTRONIC MATERIALS 43, no. 3 (2014): 717-723.
Zafari Ahmad, Hamid Reza Ghasemi Monfaredrad, and Reza Mahmuodi. "An investigation on the tribological behavior of AZ91 and AZ91+3wt% RE magnesium alloys at elevated temperatures." MATERIALS & DESIGN 54, no. 54 (2014): 544-552.
Reza Mahmuodi, and Amir Maraghi. "Shear punch creep behavior of cast lead-free solders." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 599, no. 1 (2014): 180-185.
Reza Alizadeh, and Reza Mahmuodi. " Microstructural Characterization and High-Temperature Mechanical Behavior of Cast Mg-4Zn- x Si Alloys ." ADVANCED ENGINEERING MATERIALS 16, no. 9 (2014): 1160-1166.
Mostafa Karami, and Reza Mahmuodi. "Work hardening behavior of the extruded and equal-channel angularly pressed Mg–Li–Zn alloys under tensile and shear deformation modes." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 607, no. 1-2 (2014): 512-520.
Fariba Naghdi, and Reza Mahmuodi. "The microstructure and creep characteristics of cast Mg–4Zn–0.5Ca and Mg–4Zn–0.5Ca–2RE alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 610, no. 1-2 (2014): 315-325.
Reza Mahmuodi, and Davoud Farasheh. "Microstructure and elevated-temperature shear strength of Zn–4Al–3Mg–xSn high-temperature lead-free solders." MICROELECTRONICS RELIABILITY 54, no. 8 (2014): 1592-1597.
Gholam Heidar Hasani, and Reza Mahmuodi. "Anisotropic Strain-Hardening Behavior of Mg–5%Sn–1%Ca Alloy Sheet at Elevated Temperatures." JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME 136, no. 4 (2014): 041005.
Abdolvahid Movahedi-rad, and Reza Mahmuodi. "Effect of Ag addition on the elevated-temperature mechanical properties of an extruded high strength Mg–Gd–Y–Zr alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 614, no. 1-2 (2014): 62-66.
, and Reza Mahmuodi. "Indentation creep of a cast Mg–6Al–1Zn–0.7Si alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 614, no. 1-2 (2014): 311-318.
Fariba Naghdi, and Reza Mahmuodi. "Impression creep behavior of the extruded Mg–4Zn–0.5Ca and Mg–4Zn–0.5Ca–2RE alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 616, no. 1-2 (2014): 161-170.
Hamid Reza Jafari Nodooshan, Wencai Liu, Guohua Wu, You Rao, Chenxu Zhou, Shipeng He, Wenjiang Ding, and Reza Mahmuodi. "Effect of Gd content on microstructure and mechanical properties of Mg–Gd–Y–Zr alloys under peak-aged condition." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 615, no. 1-2 (2014): 79-86.
Sahar Golmakaniyoon, and Reza Mahmuodi. "Effect of aging treatment on the microstructure, creep resistance and high-temperature mechanical properties of Mg–6Zn–3Cu alloy with La- and Ce-rich rare earth additions." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 620, no. 1-2 (2015): 301-308.
Hamid Reza Jafari Nodooshan, Wencai Liu, Guohua Wu, Reza Alizadeh, Reza Mahmuodi, and Wenjiang Ding. "Microstructure characterization and high-temperature shear strength of the Mg–10Gd–3Y–1.2Zn–0.5Zr alloy in the as-cast and aged conditions." JOURNAL OF ALLOYS AND COMPOUNDS 619, no. 1-2 (2015): 826-833.
Reza Mahmuodi, Milad Shabani-mahalli, and Mostafa Karami. "Anisotropy of creep behaviour in extruded Mg–3Al–1Zn alloy." MATERIALS SCIENCE AND TECHNOLOGY 31, no. 2 (2015): 225-230.
Abdolvahid Movahedi-rad, Reza Mahmuodi, Gue Wue, and Hamidreza Jafari Nodooshan. "Enhanced superplasticity in an extruded high strength Mg–Gd–Y–Zr alloy with Ag addition." JOURNAL OF ALLOYS AND COMPOUNDS 626, no. 1 (2015): 309-313.
Fariba Naghdi, and Reza Mahmuodi. "Effect of solution treatment on the microstructural evolution and mechanical properties of an aged Mg–4Zn–0.3Ca alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 631, no. 1 (2015): 144-152.
Ali Akbar Khamei, Kamran Dehghani, and Reza Mahmuodi. "Modeling the Hot Ductility of AA6061 Aluminum Alloy After Severe Plastic Deformation." JOM 67, no. 5 (2015): 966-972.
Reza Alizadeh, Reza Mahmuodi, Alfred Ngan, and Terence Langdon. "Microstructural stability and grain growth kinetics in an extruded fine-grained Mg–Gd–Y–Zr alloy." JOURNAL OF MATERIALS SCIENCE 50, no. 14 (2015): 4940-4951.
Athar Safari, and Reza Mahmuodi. " High Temperature Mechanical Properties of an Extruded Mg-TiO 2 Nano-Composite ." ADVANCED ENGINEERING MATERIALS 17, no. 11 (2015): 1639-1644.
Mostafa Karami, and Reza Mahmuodi. "Orientation-dependent microstructure and shear flow behavior of extruded Mg–Li–Zn alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 636, no. 1 (2015): 493-501.
Reza Mahmuodi, Mostafa Shalbafi, Abdol Reza Geranmayeh, and Mostafa Karami. "Effect of Li content on the indentation creep characteristics of cast Mg–Li–Zn alloys." MATERIALS & DESIGN 75, no. 1 (2015): 184-190.
Nazanin Bayat Tork, S.h. Razavi, Hasan Saghafian, and Reza Mahmuodi. "Microstructural Evolution and Mechanical Properties of the As-Cast and Extruded Mg-Gd Alloys." ADVANCED ENGINEERING MATERIALS 18, no. 1 (2015): 156-161.
Farshad Akbaripanah, Yahya Moradi, and Reza Mahmuodi. "Superplasticity in a fine-grained tin alloy processed by multi-directional forging." Letters on Materials 5, no. 3 (2015): 313-318.
Fariba Naghdi, Reza Mahmuodi, J.y Kang, and H.s. Kim. "Contributions of different strengthening mechanisms to the shear strength of an extruded Mg–4Zn–0.5Ca alloy." PHILOSOPHICAL MAGAZINE 95, no. 31 (2015): 3452-3466.
Reza Alizadeh, Reza Mahmuodi, and Terence G Langdon. "Superplasticity of a fine-grained Mg–9Gd–4Y–0.4Zr alloy evaluated using shear punch testing." Journal of Materials Research and Technology-JMR&T 3, no. 3 (2015): 228-232.
Naeimeh Fakhar, Faramarz Fereshteh-saniee, and Reza Mahmuodi. "High strain-rate superplasticity of fine- and ultrafine-grained AA5083 aluminum alloy at intermediate temperatures." MATERIALS & DESIGN 85, no. 1 (2015): 342-348.
Maedeh Pourmajidian, Reza Mahmuodi, Sina Hashemizadeh, Sanam Gorgannejad, and Abdol Reza Geranmayeh. "Effect of Zn and Sb Additions on the Impression Creep Behavior of Lead-Free Sn-3.5Ag Solder Alloy." JOURNAL OF ELECTRONIC MATERIALS 45, no. 1 (2015): 764-770.
Reza Mahmuodi, and Davood Farasheh. "Impression creep behavior of Zn–4Al–3Mg–xSn high-temperature lead-free solders." MICROELECTRONICS RELIABILITY 55, no. 12 (2015): 2542-2548.
Fariba Naghdi, Reza Mahmuodi, J.y. Kang, and H.s Kim. "Microstructure and high-temperature mechanical properties of the Mg–4Zn–0.5Ca alloy in the as-cast and aged conditions." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 649, no. 1 (2016): 441-448.
Reza Alizadeh, Reza Mahmuodi, Alfonso Ngan, Yie Huang, and Terence Langdon. "Superplasticity of a nano-grained Mg–Gd–Y–Zr alloy processed by high-pressure torsion." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 651, no. 1 (2016): 786-794.
Mehdi Sabbaghian, and Reza Mahmuodi. "Microstructural Evolution and Local Mechanical Properties of Friction Stir Processed Mg-3Gd-1Zn Cast Alloy." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 25, no. 5 (2016): 1856-1863.
Hamid Reza Jafari Nodooshan, Wuan Liu, Gue Wue, Wue Ding, and Reza Mahmuodi. "Effect of Gd addition on the wear behavior of Mg–xGd–3Y–0.5Zr alloys." JOURNAL OF MATERIALS RESEARCH 31, no. 08 (2016): 1133-1144.
Reyhaneh Khorshidi, Reza Mahmuodi, and Abbas Honarbakhsh-raouf. "Compressive creep behavior of a cast Al–15Mg2Si in situ composite." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 668, no. 1 (2016): 112-119.
Milad Roostaei, Mohammad Shirdel, Mohammad Habibi Parsa, Reza Mahmuodi, and Hamed Mirzadeh Soltanpour. "Microstructural evolution and grain growth kinetics of GZ31 magnesium alloy." MATERIALS CHARACTERIZATION 118, no. 1 (2016): 584-592.
Zahra Tanhaee, and Reza Mahmuodi. "The microstructure and creep characteristics of cast Mg–3Si and Mg–3Si–1Gd alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 673, no. 1 (2016): 148-157.
Faramarz Fereshteh-saniee, Naeimeh Fakhar, Farhad Karami, and Reza Mahmuodi. "Superior ductility and strength enhancement of ZK60 magnesium sheets processed by a combination of repeated upsetting and forward extrusion." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 673, no. 1 (2016): 450-457.
Reza Alizadeh, Reza Mahmuodi, Alfonso Ngan, Pedro Pereira, Yie Huang, and Terence G Langdon. "Microstructure, Texture, and Superplasticity of a Fine-Grained Mg-Gd-Zr Alloy Processed by Equal-Channel Angular Pressing." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 47, no. 12 (2016): 6056-6069.
Mostafa Shalbafi, Reza Roumina, and Reza Mahmuodi. "Hot deformation of the extruded Mg–10Li–1Zn alloy: Constitutive analysis and processing maps." JOURNAL OF ALLOYS AND COMPOUNDS 696, no. 1 (2016): 1269-1277.
Naiemeh Fakhar, Faramarz Fereshteh-saniee, and Reza Mahmuodi. "Significant improvements in mechanical properties of AA5083 aluminum alloy using dual equal channel lateral extrusion." TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 26, no. 12 (2016): 3081-3090.
Faramarz Fereshteh-saniee, Naiemeh Fakhar, Mohammad Asgari, and Reza Mahmuodi. "A new experimental-numerical approach for studying the effects of gas pressure profile on superplastic forming characteristics of Al-Mg5.6 alloy." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 91, no. 5-8 (2016): 1771-1780.
Reza Alizadeh, Reza Mahmuodi, Pedro Pereira, Yie Huang, and Terence G Langdon. "Microstructural evolution and superplasticity in an Mg–Gd–Y–Zr alloy after processing by different SPD techniques." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 682, no. 1 (2017): 577-585.
, , and Reza Mahmuodi. "Microstructural evolution and high temperature mechanical properties of cast Al–15Mg2Si–xGd in situ composites." JOURNAL OF ALLOYS AND COMPOUNDS 700, no. 1 (2017): 18-28.
Reza Alizadeh, Reza Mahmuodi, Alfonso Ngan, and Terence G Langdon. "Microstructural evolution during hot shear deformation of an extruded fine-grained Mg–Gd–Y–Zr alloy." JOURNAL OF MATERIALS SCIENCE 52, no. 13 (2017): 7843-7857.
Reza Mahmuodi, Amir Maraghi, and Abdol Reza Geranmayeh. "High-temperature shear strength and hardness of cast lead-free solders." KOVOVE MATERIALY-METALLIC MATERIALS 55, no. 3 (2017): 211-216.
Fariba Naghdi, Reza Mahmuodi, J.y. Kang, and H.s. Kim. "Threshold creep behaviour of an aged Mg–Zn–Ca alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 696, no. 1 (2017): 536-543.
Babak Kondori, and Reza Mahmuodi. "Effect of Ca additions on the microstructure and creep properties of a cast Mg–Al–Mn magnesium alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 700, no. 1 (2017): 438-447.
Reza Alizadeh, Reza Mahmuodi, Oscar Ruano, and Alfonso Ngan. "Constitutive Analysis and Hot Deformation Behavior of Fine-Grained Mg-Gd-Y-Zr Alloys." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 48, no. 11 (2017): 5699-5709.
Hasan Saghafian, Nazanin Bayat Tork, Mohammad Hosein Razavi, and Reza Mahmuodi. "Strain-rate sensitivity of Mg–Gd alloys after extrusion and simple shear extrusion." MATERIALS SCIENCE AND TECHNOLOGY 33, no. 18 (2017): 2244-2252.
Seyyed Alireza Torbati-sarraf, Reza Alizadeh, Reza Mahmuodi, and Terence G Langdon. "Evaluating the flow properties of a magnesium ZK60 alloy processed by high-pressure torsion: a comparison of two different miniature testing techniques." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 708, no. 1 (2017): 432-439.
Arash Mohammadi, and Reza Mahmuodi. "Elevated-Temperature Mechanical Properties of Lead-Free Sn-0.7Cu-xSiC Nanocomposite Solders." JOURNAL OF ELECTRONIC MATERIALS 47, no. 2 (2017): 1721-1729.
Farid Labib, Reza Mahmuodi, and Hamid Reza Ghasemi Monfaredrad. "High-Temperature Mechanical Properties of the P/M Extruded Mg-SiCp Composites." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 27, no. 3 (2018): 1224-1231.
Reyhaneh Khorshidi, Abbas Honarbakhsh-raouf, and Reza Mahmuodi. "Effect of minor Gd addition on the microstructure and creep behavior of a cast Al–15Mg 2 Si in situ composite." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 718, no. 1 (2018): 9-18.
Allahyar Geramy, Reza Mahmuodi, Abdol Reza Geranmayeh, Elahe Soltanmohamadi Borujeni, Homa Farhadifard, and Hojat Darvishpour. "A comparison of mechanical characteristics of four common orthodontic loops in different ranges of activation and angular bends: The concordance between experiment and finite element analysis." International Orthodontics 16, no. 1 (2018): 42-59.
M.j. Esfandyarpour, Reza Alizadeh, and Reza Mahmuodi. "Applicability of shear punch testing to the evaluation of hot tensile deformation parameters and constitutive analyses." Journal of Materials Research and Technology-JMR&T 8, no. 1 (2018): 996-1002.
Nazanin Bayat Tork, Hasan Saghafian, , K.J Al-Fadhalah, Ramin Ebrahimi, and Reza Mahmuodi. "Microstructure and texture characterization of Mg–Al and Mg–Gd binary alloys processed by simple shear extrusion." Journal of Materials Research and Technology-JMR&T 8, no. 1 (2019): 1288-1299.
Mohammad Hoseini-Athar, Reza Mahmuodi, Peter Hedstrom, and B Prasath Babu. "Microstructural evolution and superplastic behavior of a fine-grained Mg–Gd alloy processed by constrained groove pressing." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 754, no. 1 (2019): 390-399.
Abbas Jamali, and Reza Mahmuodi. "Evolution of microstructure, texture, and mechanical properties in a multi-directionally forged ZK60 Mg alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 752, no. 1 (2019): 55-62.
, Farshad Akbaripanah, and Reza Mahmuodi. "Microstructure, Texture, and Mechanical Properties of AM60 Magnesium Alloy Processed by Extrusion and Multidirectional Forging." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 28, no. 5 (2019): 3021-3030.
Mohammad Hoseini-Athar, and Reza Mahmuodi. "Effect of Zn content on hot deformation behavior of extruded Mg–Gd–Zn alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 759, no. 1 (2019): 745-753.
Mohammad Hoseini-Athar, Reza Mahmuodi, B Prasath Babu, and Peter Headstrom. "Effect of Zn addition on dynamic recrystallization behavior of Mg-2Gd alloy during high-temperature deformation." JOURNAL OF ALLOYS AND COMPOUNDS 806, no. 1 (2019): 1200-1206.
Seyed Masoud Ashrafizadeh, and Reza Mahmuodi. "Effects of Gd, Y, and La Rare-Earth Elements on the Microstructural Stability and Elevated-Temperature Mechanical Properties of AZ81 Magnesium Alloy." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 50, no. 12 (2019): 5957-5968.
Faramarz Fereshteh-saniee, Naeimeh Fakhar, and Reza Mahmuodi. "Influence of Combined Severe Plastic Deformation and Sheet Extrusion Process on the Superplastic Formability of AA 5083 Aluminum Alloy Assessed by Free Bulge Test." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 28, no. 11 (2019): 6682-6691.
Mahdi Sabbaghian, Reza Mahmuodi, and Kwang Shin. "Effect of texture and twinning on mechanical properties and corrosion behavior of an extruded biodegradable Mg–4Zn alloy." Journal of Magnesium and Alloys 7, no. 4 (2019): 707–716.
Nadia Azizi, and Reza Mahmuodi. "Superplasticity of fine-grained Mg–xGd alloys processed by multi-directional forging." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 767, no. 1 (2019): 138436.
Mohammad Hoseini-Athar, Reza Mahmuodi, B Prasath Babu, and Peter Headstrom. "Microstructure, texture, and strain-hardening behavior of extruded Mg–Gd–Zn alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 772, no. 1 (2020): 138833.
Masoud Mehrabi-Mehdiabadi, and Reza Mahmuodi. "Effects of yttrium addition on microstructural stability and elevated-temperature mechanical properties of a cast Mg–Zn alloy." JOURNAL OF ALLOYS AND COMPOUNDS 820, no. 1 (2020): 153083.
Mohammad Amin Salavati, Adam Vida, Jeno Gubicza, Reza Mahmuodi, Farshad Akbaripanah, and Anita Heczel. "A comparative study on the Microstructural evolution in AM60 alloy processed by ECAP and MDF." JOURNAL OF ALLOYS AND COMPOUNDS 763, no. 1 (2639): 629-637.

Papers in National Journals

Nazanin Bayat Tork, S.h. Razavi, Hasan Saghafian, and Reza Mahmuodi. "Superplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation." Iranian Journal of Materials Forming 3, no. 1 (2016): 65-74.

Presented Papers in International Conferences

Reza Mahmuodi, and . "Effect of Zr Addition on the aging behavior of A319 Aluminum cast alloy." Malzeme 2004, Denizli.
Mahmoud Nili Ahmadabadi, Reza Mahmuodi, , and . "Improvement of mechanical properties in a nano-structured Fe-Ni-Mn steel prepared by heavy plastic deformation." Nanostructured Materials by High Pressure Severe Plastic Deformation, Donetsk.
Reza Mahmuodi, and . "Calculation of forming limit diagrams." TICME 2005 Conference, Tehran.
Reza Mahmuodi, Hamid Reza Ghasemi Monfaredrad, and Mohammad Ghambari. "Processing and wear characteristics of iron-based composite friction materials." 2nd International Conference on: Applications of Traditional and High Performance Materials in Harsh Environments, Sharjah.
Reza Mahmuodi, , , and . "Indentation creep of lead-free Sn-Bi solder alloys as replacements of Sn-Pb used in microelectronic packaging." Indentation creep of lead-free Sn-Bi solder alloys as replacements of Sn-Pb used in microelectronic packaging?, Proceedings of the 16th International Manufacturing Technology, IEMT 2006, Kuala Lumpur.
, Massoud Emamy, Reza Mahmuodi, and . "THE STUDY OF Fe, Mn AND Sr ADDITIONS ON THE MICROSTRUCTURE AND FLUIDITY OF A380.2 ALUMINIUM ALLOY." MP3, Beijing.
Reza Mahmuodi, and . "Scaling of strength parameters with ductility in non-heat treatable aluminum alloys." MP3, Beijing.
, Massoud Emamy, and Reza Mahmuodi. "The study of Fe, Mn and Sr additions on the microstructure and fluidity of A380.2 aluminium alloy." MP3, Beijing.
Reza Mahmuodi, , and . "Superplastic indentation creep of fine-grained Sn-1% Bi alloys." First International Conference on Ultrafine-Grained and Nanostructured Materials, Tehran.
Reza Mahmuodi, , and Hamid Reza Ghasemi Monfaredrad. "Wear behavior of magnesium reinforced by Al2O3 nano-particles." 3rd International Conference on: Applications of Traditional and High Performance Materials in Harsh Environments, Sharjah.
, , , and Reza Mahmuodi. "Materials Selection for Spar of a Human Powered Aircraft (HPA) Using a Simplified Fuzzy Logic Approach." 7th Conference of Iranian Aerospace Society, Tehran.
R. Alizadeh, Reza Mahmuodi, and T. G. Langdon. "Superplasticity of a fine–grained Mg–9Gd–4Y–0.4Zr alloy assessed using shear punch testing." The 4th International Conference on Ultrafine-Grained and Nanostructured Materials,.
Reza Mahmuodi. "Tribological behaviourof p/m self - lubricating porous bronze bearings." p/m Auto 96,.
Reza Mahmuodi. "Ophimization of mechanical properties of Alsl4130 steel." International conferemce on Thermomechamical processing of steel &other Materials,.

Presented Papers in National Conferences

, Reza Mahmuodi, Hamid Reza Ghasemi, and Mohammad Ghambari. "investication of Tribological behavior of sintered copper base friction materials." 7th Congress of the Iranian Metallurgical Society, Tehran.
F. Akbaripanah, F. Fereshteh-saniee, and Reza Mahmuodi. "Effects of extrusion and equal channel angular pressing on the microstructure, tensile, and shear behavior of the magnesium alloy AZ80." Sixth Joint Congress of Iranian Metallurgical Society and Iranian Foundrymen Society, Tehran.

No items yet!